I then add Dummy 1 and Dummy 2 clients using a fake MAC address. In the DHCP Reservations section click on the + sign. Now we have to add the fake IP reservations. So I basically setup a DHCP scope consisting of two IP addresses. You can have another range, adjust it to your needs. The IP address space on my LAN is 192.168.1.x. Setup the DHCP scope according to the settings in the screenshot below. Then go to the Networking Tab and click on Network Options…: Let me walk you trough the procedure using the screenshots below.įirst let’s start by opening the Airport Utility, select your Airport Extreme Base Station and click on Edit: In another post I will explain why I need another DHCP server. This way the Airport Extreme will not be able to serve IP addresses in my network, and I can now setup another DHCP server to fit my needs. So basically I am going to setup my DHCP server on the Airport Extreme with a scope of two IP addresses and then immediately reserve those ip’s with fake MAC addresses. None of the options suited my needs, so what I found out is that I can keep the DHCP and NAT option enabled, but deplete the DHCP servers IP address scope. DHCP and NAT (which I am using currently).There are only three options to choose from: I am a fan of Apple products, and wanted to keep using the Airport Extreme for my WAN -> LAN connection (internet), because I am pleased with the performance and stability. Guess what, when you disable DHCP on the Airport Extreme, it also disables NAT! Not what I had in mind. The Apple Airport Extreme is my home router and access point. Recently I wanted to use DHCP on my Synology NAS and disable it on the Airport Extreme.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |